[TenTec] Problem with 705 mic

[ac5e at comcast.net]

Mark, the 705 will work with voltage supplied through the mike plug on the front of your Ten-Tec radio. It's only needed if you use a 705 on a non - Ten Tec radio. 

So first take the battery out. Make sure the black "lock" button stands up above the top of the mike case, and you can feel the switch operate when you push and release the black button. Ditto the grey PTT button. Then look under your mike's "chin" for the PTT-VOX switch. Exercise it a few times to insure good contact, then leave it set in PTT. Try it again. It should work.

73  Pete Allen  AC5E