[TenTec] Orion Aux I/O socket

[Mark Erbaugh]

Dick,

You can use the 5 pin DIN with the Orion. The 5 pin DIN has the same spacing
as the 8 pin.  Pins 1 through 5 on the Orion are the same as on the Jupiter.
The difference between pins 4 and 6 is that 4 is the output of the main and
6 is the output of the subrecevier and the audio can't be re-routed via menu
options like you can with the headphones and speaker.

73,
Mark

----- Original Message ----- 
From: "Richard Hemingway" <rheming1 at sbcglobal.net>
To: <tentec at contesting.com>
Sent: Sunday, March 14, 2004 12:21 PM
Subject: [TenTec] Orion Aux I/O socket


> My new Orion will arrive this week and I have downloaded the manual.
> I had been using SignaLink SL-1+ with the Jupiter.  I notice that the
> AUX socket on the Jupiter is 5 pin and the Orion is an 8 pin.  I am
> wondering if I can just plug the 5 pin into the Orion 8 pin socket?
>
> The pin out is as follows:
>
> 5- pin: 8-pin:
>
> 1- audio in 1- audio in
> 2- ground 2- ground
> 3- PTT 3- PTT
> 4- audio out 4- left AUX out ***
> 5- spare 5- spare
> 6- right AUX out
> 7- FSK
> 8- NC
>
> I will not be using FSK any time soon.  Can I use the "4- left AUX
> out for PSK 31 to the computer??  (BTW what is the difference between
> 4 and 6 above??)
>
> Thanks,
>
> Dick, N5XRD
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>