[TenTec] New Orion Firmware

[Jim Reid]

> Well, downloaded from net okay and uploaded to rig okay.
> BUT on tuning there is no difference in tuning rate whether use step 1, 10  
> or 100.  All step as if set at a step rate of 100.  No fine tuning.
> Did I miss something?

Evidently,  can't imagine what, however.  Mine is operating
very fb.  I would perform the download again, and be sure
you got 9408 lines.  Also be sure that you have "stop on error"
checked.

73,  Jim KH7M