[TenTec] ??QSK GONE AWAY

[Thomas Uhlman]

I have tested mine with ver 1.370 and I believe you're right in that there
is a tiny delay after a dit or dah before the receiver comes back on... So,
I can't here the receiver between the dits... I can only hear the receiver
between letters at about 25 wpm or so... I don't really know how this
compares to ver 3.169 as I didn't pay a lot of attention to the QSK
operation with that version....

It does however seem slower than my Yaesu FT-757 QSK but to me this is very
very minor as hearing signals between dits at 20 wpm or faster I would
likely ignore anyway....

Hope this helps...

de Tom NJ1K



----- Original Message ----- 
From: "Steve Ellington" <N4LQ at igLou.com>
To: <tentec at contesting.com>
Sent: Saturday, May 22, 2004 3:18 PM
Subject: Re: [TenTec] ??QSK GONE AWAY


> Has anyone other than Tom tested the QSK. Tom says his QSK works at 70
WPM!
> Mine doesn't even have QSK. Tom are you really hearing between your dits
at
> 70WPM? I can only hear at 15. I've reinstalled, reset and repented.
>
> Steve
> N4LQ
>
> ----- Original Message ----- 
> From: "Steve Ellington" <N4LQ at igLou.com>
> To: <Tentec at contesting.com>
> Sent: Friday, May 21, 2004 3:18 PM
> Subject: [TenTec] QSK GONE AWAY
>
>
> >
> > I tested mine by generating a constant carrier with another rig then
> keying
> > the Orion while listening at various speeds. Not until I got down to 15
> wpm
> > could I hear the carrier breaking through. Now we have silky-smooth
> non-QSK.
> >
> > Steve
> > N4LQ
> >
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec at contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>