[TenTec] omni 6+ pbt tune

[Duane A Calvin]

Mine never did this.  If I have the PBT at 12 o'clock, switching back and
forth from LSB to USB requires no change of the PBT control.  Likewise,
CW's normal position in the same.  Now, USB and LSB do tend to have a
slightly different sound to them, but it's nothing that PBT will change. 
For what it's worth.....

Ray, for clarity purposes, you might want to describe how much you need
to change the PBT when changing modes.

        73,  Duane


On Wed, 26 May 2004 13:06:58 -0500 "Jim Miller WB5OXQ"
<wb5oxq at grandecom.net> writes:
> Any time you change from lsb to usb the passband is reversed, so if 
> you are
> not dead center on the pbt it will change.  My omni 6+ has aloways 
> done
> this.
> ----- Original Message ----- 
> From: <K5lxz at wmconnect.com>
> To: <tentec at contesting.com>
> Sent: Wednesday, May 26, 2004 12:42 PM
> Subject: [TenTec] omni 6+ pbt tune
> 
> 
> > I have to adjust the 'PBT" each and every time I change modes on 
> my Omni
> 6+
> > and it does not seem normal to me.   Any suggestions for a fix 
> would be
> > appreciated.
> > Ray Husher W5EW
> > _______________________________________________
> > TenTec mailing list
> > TenTec at contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> >
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 
> 


Duane Calvin, AC5AA
Austin, Texas