[TenTec] Omni D help Please

[Richard Detweiler]

Haven't had this problem,

Try giving Ten Tec a call Monday morning, they are very knowledgable and 
they give good advise.

Best 73's
Rich
K5SF

>From: "Tony" <g3zrj at morsekey.fsnet.co.uk>
>Reply-To: tentec at contesting.com
>To: <tentec at contesting.com>
>Subject: [TenTec] Omni D   help Please
>Date: Thu, 18 Nov 2004 19:39:53 -0000
>
>Please could anyone out there help with the following problems with OMNI-D 
>Series C
>
>1.  heavy clicks rx audio output on QSK and on TX/RX changeover on semi 
>break-in,  the transmit
>sig is fine.   With CQWW CW coming up I'd be very grateful if someone could 
>come up with a cure for this, at present I position the headphones about an 
>inch in front of my ears and turn up the AF gain, but this isn't too good 
>on very weak sigs.
>
>2.  SWR meter seems very reluctant to indicate more than approx 2 : 1  SWR 
>no matter how badly
>mismatched the load is -  I think this may be related to the non operation 
>of the ALC on the rig.
>
>Thanks in anticipation
>Tony G3ZRJ
>
>
>_______________________________________________
>TenTec mailing list
>TenTec at contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec