[TenTec] Tentec Orion & Oscilloscope question

[W1GOR]

Dick,

Entering 4263 as a Bird search yields nothing...  The two types of samplers 
are 4273 and 4275...

73, Larry - W1GOR


----- Original Message ----- 
From: "Dick Green WC1M" <wc1m at msn.com>
To: <eric.sensi at skynet.be>; <tentec at contesting.com>
Sent: Thursday, November 25, 2004 1:04 AM
Subject: RE: [TenTec] Tentec Orion & Oscilloscope question


Eric,

I use a Bird 4263 RF Sampler. It's designed for exactly what you want to do.
You put it inline with the coax, and it has a sampling port for your scope
probe. Insertion loss is minimal. See the following link, near the bottom of
the page:

http://www.rfparts.com/bird2.html

Hope this helps.

73, Dick WC1M

> -----Original Message-----
> From: Eric SENSI [mailto:eric.sensi at skynet.be]
> Sent: Tuesday, November 23, 2004 3:41 PM
> To: tentec at contesting.com
> Subject: [TenTec] Tentec Orion & Oscilloscope question
>
>
> Hello all,
>
> As I'm not an electronic engineer but just an IT engineer :-)
>
> I'd like to know the better way to take the "modulated
> signal" to inject it into an oscilloscope ?
>
> I'm very new to this so be cute with me please.
>
> At the moment I have :
>
> - A Tentec Orion;
> - A Tektronix 453A oscilloscope (in very nice shape and
> working condition, bought from a Tektronix engineer for nothing !)
>   (it's a 50MHz Dual Channel Delayed Sweep Oscilloscope);
> - A new set of oscilloscope probes with 1:1 and 1:10 attenuation;
> - A bunch of newbie questions ! HI
>
> I'd like to see my modulation signal on the scope while I'm
> talking. I know a guy who is using a "T" shapep M/F/F plug at
> the end of the ANT 1 output... One way goes to the antenna,
> the other to the probe ! I'm not sure it's the better way to
> catch the signal but I can't tell you exactly why. I'm afraid
> of that "open" connection on one side of the output SO-239
> socket... think it's not good for the PA itself.
>
> Is there another output on the Orion to catch the signal ?
> Via the transverter output jack (I don't think so, because
> the main transmitter is not enabled in that case)... or on
> the AUX I/O or the LINE OUT RCA jack ?
>
> Many thanks to those who will help with this !
>
> All the best, Eric de ON6CV.
>
>
>
>
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec