[TenTec] Omni 6+ rx dead

[Jim]

When this has happened to me, it was because I accidentally pushed in 
the ATTN button. I'm sure you are not scatterbrained enough to do 
something like that!

			Jim  N4AL

Jim Miller WB5OXQ wrote:

> My old faithful and beloved omni 6+ had no receive when I turned it on last
> night.  It will transmit fine but the receiver acts like there is no antenna
> connected to it on all bands.  There are the usual birdies here and there
> and it will receive the signal from another hf rig who's antenna is about
> 50' away.  The 100 watt signal from the other rig gives only about a S5 on
> the omni's S meter.  I cnecked the antenna connections and the rca cables to
> and from the qsk connection on the Centurion and all seems good.  I replaced
> the amp cables with a jumper with no results.
> Unless someone has a suggestion I guess it is off to TenTec Service.
> Jim in Waco, WB5OXQ.
> 
> 
>