[TenTec] Meter Problem

[holladayfd]

Richard,
WD-40 is a water displacing lubricant.  When the solvent evaporates, it
leaves a very sticky film.  In this condition, it will act more like a glue!
73,
Frank, K4VMO
----- Original Message -----
From: "Irena & Richard Jenkins" <richard.jenkins at internode.on.net>
To: <tentec at contesting.com>
Sent: Saturday, October 23, 2004 12:34 AM
Subject: [TenTec] Meter Problem


> I was 'too generous' with the spray when cleaning up a nuisy pot. control
on
> my Argosy.  After doing the job I have found the S-meter is very stiff ...
> and not working as it should.  What is the next (restorative) action ...
> would a careful spray with WD-40 (or similar) loosen it up so it works
> again??
>
> Richard
> --
> --
> Irena & Richard Jenkins               VK1NDV & VK1RJ
> Canberra, AUSTRALIA
> ====================================================
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>