[TenTec] Omni 6 (Option 1) Intermittent Audio

[B.Lee Cornwell]

Hello Joe - Have you tried switching in a different filter??... It may be as 
simple as re-seating one or all of the filters to gain a good contact again. 
Maybe a drop of de-oxit on each filter pin.
good luck!
B. Lee Cornwell
http://home.earthlink.net/~k2blc/index.html


----- Original Message ----- 
From: "Joe Smith" <lanier732003 at yahoo.com>
To: <tentec at contesting.com>
Sent: Monday, April 11, 2005 9:25 AM
Subject: [TenTec] Omni 6 (Option 1) Intermittent Audio


> About every tenth time, plus or minus, that I turn on
> the Omni 6 it acts totally mute (no audio out).  A
> reset does not help.  However, if leave rig alone,
> power on (30A supply), for about five minutes it
> un-mutes and all is normal. Rig is populated with the
> 1.8/500/250 filters in the 6.3MHz IF slots but, is
> otherwise stock. There is a 3rd party external
> communications speaker connected. Other gear on the
> same power supply, including an Argo 5, all work
> normally. I've owned the Omni 6 (Option 1) about 8
> months (it is one fantastic piece of CW equipment).
> The intermittent issue started about a month ago. Any
> thoughts? 73, Chuck AF4PP
>
>
>
> __________________________________
> Do you Yahoo!?
> Yahoo! Small Business - Try our new resources site!
> http://smallbusiness.yahoo.com/resources/
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>