[TenTec] LDG AT-100 Pro

[david feldman]

The message seems to be clearer in the manual for the AT200PRO I just 
received - I use it with an old tube rig in one configuration (a QRP-ified 
Yaesu FTdx560, still able to max out at around 75W), and just try to avoid 
gas during the tune-up phase.

73 Dave WB0GAZ wb0gaz at hotmail.com

>After a careful and complete reading of the owner's
>manual, I discovered, in the "fine print" but not in
>the specifications page, that while the tuner is
>advertised as a 125 watt tuner in all LDG ads and on
>their website, when you read the fine print in their
>owner's manual, it states that power must be reduced
>to only 25 watts in tune mode when using a transceiver
>that doesn't have power foldback into high swr's.
>That's only 20% of the advertised power rating.