[TenTec] boost mobile voltage?

[Clark Savage Turner]

Just a thought (though you may already have had the same thoughts, it 
is worth a moment!)

1.  Check your power cables for voltage drop (improve them as a matter 
of course)
2.  Check your power connectors for voltage drop (use a bit of DeOxit 
or something on them)
3.  Measure the voltage somewhere inside the radio and also at the 
power source to see exactly what the drop looks like, it could help you 
find a simpler solution.

If I recall correctly, my Corsair (isn't this the one you have Bob?  
:-) worked fine from a Marine Deep Cycle battery, even with the Herc II 
attached (at full charge).  There may be hope that the Corsair should 
hang in to reasonable voltages.  However, I've had a few Scouts around 
and they are not so forgiving.

I believe the battery booster is a great idea regardless, but the 
voltage drop is an easy problem to look for and cure in most cases!

Clark
WA3JPG


On Apr 19, 2005, at 4:54 AM, Bob Stephens wrote:

> I thinking of getting a W4RRY battery booster for my mobile/portable 
> work.
>
>  
>