[TenTec] Orion and TVI

[K. Indart]

Is your Power Supply a switching type.  These are notorius for creating
noise.  Can you try another power supply, preferably the one you use with
the Kenwood.   Are your neighbours on a common TV distribution system ?
This is the first time I have heard of an Orion causing TVI !   Go back
again with the Kenwood and see if the TVI has disappeared.  Or it could be
that something has changed in the TV distribution amplifier, including a bad
coax connector from the TV antenna to the distributor.  Check the coax
antenna connector to the Orion; maybe the shield is intermittent and failed
while moving it when you changed equipment.  Let us know how you do.

Ken, WA4RPH   (I have an OMNI VI+ and lKW Centurion, tribander beam and Zepp
all band ant and no TVI on any band)
-----Original Message-----From: tentec-bounces at contesting.com
[mailto:tentec-bounces at contesting.com]On Behalf Of Giuseppe Crosta
Sent: Thursday, April 28, 2005 4:03 AM
To: tentec at contesting.com
Subject: [TenTec] Orion and TVI

Dear friends,

I would like to submit this question to the group.
I have used for several years a Kenwood TS940 transceiver and I never cause
TVI problems to my neighbour apartments.
Now since I start to use a new TT Orion rtx all my neighbours note strong
TVI during the operation.
All other equipment are the same: 3 el yagi antenna, power lines, coaxial
line and so on.
No changes in radio shack. I have added only an external DC power supply for
the new rig.
Why TVI starts? What are the possible reasons and the corrections? Have any
other ham the same troubles using the Orion rig?
Thank for your suggestions and help.

Beppe IZ2ABU

----------------------------------------------------------------------------
--------------------------------------------------------
  AGUSTA  S.p.A.
  An Agusta-Westland Company

  Giuseppe CROSTA
  c/o Politecnico di Milano
  Galleria del Vento - Wind tunnel facility
  Via La Masa, 34
  20158 Milano - Italy

  Phone   +39-02-2399.8057
  Fax       +39-02-2399.8274

  E-mail crosta at aero.polimi.it
----------------------------------------------------------------------------
--------------------------------------------------------

Disclaimer :
This e-mail is strictly confidential and solely for the addressee. Agusta
S.p.A. does not give any representation or warranty as to the accuracy or
completeness of  the contents of this e-mail,  nor shall the company be held
liable to any person resulting from the use of any information contained in
this e-mail and shall not  be  liable to any person who acts or omits to do
anything in reliance upon it. If you are not the intended addressee you must
not use, disclose or copy this transmission; in this case, please notify us
immediately by telephoning:
+39-(02)-2399.8057
Thank you

Il presente messaggio deve intendersi strettamente confidenziale e destinato
esclusivamente al sopra riportato destinatario. Agusta S.p.A. non garantisce
l'esattezza e la completezza del messaggio così come ricevuto e in ogni caso
si ritiene esonerata da ogni responsabilità in conseguenza di un'impropria
utilizzazione del presente messaggio. Qualora il messaggio Vi fosse
pervenuto erroneamente, Vi è fatto divieto di usare, diffondere o copiarne
il suo contenuto. In tale caso Vi preghiamo di volere immediatamente
contattare il seguente numero telefonico:
(02)-2399.8057
Grazie.


_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec