[TenTec] Corsair problem

[Mike Hyder -N4NT-]

There are two phono jacks on the rear panel where a remote VFO connects. 
When that VFO is not connected, there must be a jumper between the two 
jacks.

73, Mike N4NT

----- Original Message ----- 
From: "Bob Stephens" <bstephens1 at mindspring.com>
To: <tentec at contesting.com>
Sent: Saturday, August 06, 2005 10:39 PM
Subject: [TenTec] Corsair problem


My Corsair display reads 9.1 followed by zeros on 160-20meters and 9
followed by zeros 0n 17 through 10. It does not receive and turning the
dial does not affect the frequency.

Any ideas?

Bob,
KB1CIW