[TenTec] Corsair and Corsair II Alignment

[Bruce Lanning]

To whom it may concern......

I was trying to align the Carrier Null Adjustment on the DOUBLE SIDEBAND
BOARD # 80980 on the CORSAIR II. The manual instructions are entirely wrong
and very poorly written. I finally figured out my problem, by keying the
mic. with the DRIVE control fully counterclockwise. Then measure the RF out
at the antenna jack, or listen to your signal on another receiver. This
procedure works very well.

I enter this text in the hope others with similar problems don't have the
frustration that I experienced with my CORSAIR II.

Bruce  W1GBS