[TenTec] Orion problem

[Toby Pennington]

NO!  User 2 is the way to get into the update mode when the rig is locked
up.  I have recently had this happen to me twice and nothing worked but
reloading the firmware by using the User 2 button.  Recall did not work at
all.

Toby  W4CAK

----- Original Message ----- 
From: "Barry Gross" <barry.n1eu at gmail.com>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Thursday, December 22, 2005 9:30 PM
Subject: Re: [TenTec] Orion problem


> On 12/23/05, Toby Pennington <toby423 at earthlink.net> wrote:
> >
> >
> > Don,  Hold user 2 in while turning the power on and this will put you
into
> > the firmware update mode,  and then reload the firmware that you were
> > using.
> > This may be the only way to unlock the rig.
>
>
> Don't you mean to hold "Recall" in while turning the power on?
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec