[TenTec] using the D-104 on the jupiter or triton IV

[James C. Owen, III]

Hi Mike,
   I have used my original D104 purchased in 1958 with every rig
I've ever owned including my present Jupiter, and it has worked
just fine with all EXCEPT the Argonaut V for which the input
impedance is too low. However an amplified D104 works fine if you
don't put in too much gain from the D-104. I have everyone tell
me the Jupiter and D104 (unamplified) sounds like me. I tried a
Ten-Tec/Heil Studio One and everyone told me it sounded terrible
with way too much Bass. With he Jupiter lower cutoff set much
higher (300-600 Hz) then there were not enough highs. I sold it
and went back to the D104. I have my Jupiter set for a low cutoff
of 200 Hz and a 2.4 Khz bandwidth. BTW the Heil with an HC-4
element seems to work fine also.
73 Jim K4CGY

--- Mike Bryce <prosolar at sssnet.com> wrote:

> hola...
> 
> anyone have any success using the D-104 on either the jupiter
> or triton 
> IV?
> 
> I get reports of way too many highs and zip bass....
> 
> mike
> 
> 
> Mike Bryce, WB8VGE
>   the heathkit shop
> SunLight energy systems
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 


	
		
__________________________________ 
Yahoo! for Good - Make a difference this year. 
http://brand.yahoo.com/cybergivingweek2005/