[TenTec] N4PY Orion Control Program Version 1.14 now available

[dennisl at ispwest.com]

Carl,
Thank you for the info. Please let me know when you recieve my check - I would like to upgrade as soon as possible.

THanks
DENNIS LANE (KR7Q)

----- Original Message -----
From: Carl Moreschi [mailto:n4py at earthlink.net]
Sent: 2/3/2005 8:49:08 AM
To: n4pysoftware at yahoogroups.com;tentec at contesting.com;orion at contesting.com
Subject: [TenTec] N4PY Orion Control Program Version 1.14 now available

> Version 1.14 of my Orion control program is now available to all registered
> users.  Highlites of the new version are:
> 
> Version 1.14
> 
>   1)
>   Added two additional scratch pad memories.
> 
>   2)
>   Prevent high speed tuning mode from coming on if SPLIT is active.
> 
>   3)
>   Added Ctrl-Arrow Up to move PBT up and Ctrl-Arrow Down to move PBT down.
> 
>   4)
>   Added remembering RF gain control setting by band.
> 
>   5)
>   Force RF gain on sub-receiver to 100 when sweep is run.
> 
>   6)
>   The RF gain control can now be toggled to control the VFO B receiver
>   RF gain.  This is done by clicking the RF label above the slider.
>   Upper case "RF" indicates the control is for VFO A and lower case
>   "rf" indicates the control is for VFO B.
> 
>   7)
>   Added FSK capability to the external logging program interface
>   and WriteLog.
> 
>   8)
>   Added a front panel AGC decay slider that is shared with the front
>   panel AGC threshold control.  The slider label for this control is
>   a toggle button to go between threshold and decay.
> 
>   9)
>   Moved the CW keyboard memory edit boxes to the CW Keyboard window.
> 
>   10)
>   Added an AGC restore at program exit to restore the Orion AGC speed
>   to slow, medium, or fast.
> 
>   11)
>   Added the "Esc" key to get out of direct frequency entry mode if no
>   numeric keys have been pressed.
> 
> 73,
> 
> Carl Moreschi N4PY
> Franklinton, NC
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec