[TenTec] Orion roofing filters

[Martin AA6E]

I have to agree that Orion's stock roofing filters are 100% adequate
for me, and I bet for most other ops.  The only time when a 600 Hz
filter would help you over a 1000 Hz stock filter is when there is
extremely strong QRM in the extra 400 Hz of bandpass near a weak signal
you are trying to copy.  The DSP selectivity, down to 100 Hz, is fine
for my operations. YMMV

My advice (worth what you pay for it) is not to spend money on filters
until you check to see if the stock filters don't do the job for you.

73, Martin AA6E

--- jack <jfriend31 at comcast.net> wrote:

> the Orion has a standard 1000 KHz roofing filter that works just
> great for 
> CW ...i have that one in line all the time when operating CW
> jack ak7o
> 
> ----- Original Message ----- 
> From: <K4IA at aol.com>
> To: <tentec at contesting.com>
> Sent: Saturday, February 05, 2005 9:06 AM
> Subject: Re: [TenTec] Orion roofing filters
> 
> 
> > Henrik
> >
> > Many folks have had good CW results by using an INRAD 650hz roofing
> filter
> > in the 1khz slot. After that the DSP does the rest.
> >
> > Radio  k4ia
> > "Buck"
> > Fredericksburg, VA USA
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec at contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> > 
> 
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>