[TenTec] omni 6 plus question

[Don Steele]

Don,I had an Omni 6+ with the 2,8 Inrad filters.I installed the 2.8 in place 
of the factory 2.4 filters.I then installed 1.8 in both IF's for narrow SSB 
reception.This leaves your other slots for CW filters if you want them.I 
thought the receive was much better doing it this way.

Don
NT0F
----- Original Message ----- 
From: <CROCDONZ1 at aol.com>
To: <tentec at contesting.com>
Sent: Wednesday, January 05, 2005 1:54 PM
Subject: [TenTec] omni 6 plus question


>i have purchased and installed both of the 2.8 inrad filters. i have them
> installed in the 250 hz cw and nar 2 slots. is this ok? the thing i have 
> observed
> is when i have them selected, its like i have turned on a 10 db preamp as
> well. going back to the stock 2.4 and 1.8, the s meter readings are back 
> in line
> with all the other rigs i have. is  this normal? did i do something wrong? 
> i
> just want to be sure i am not hurting the rigs performance.
>
> thanks
>
> don-kd9mf
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec