[TenTec] Adding the 2.8khz filters to Omni VI

[Barry N1EU]

"Rick Williams" <rick.williams at telus.net> wrote:

>Not quite finished.  I believe that InRad suggests that it is advisable to
>null the carrier before the job is complete.

I believe Inrad includes instructions with the filter and it is probably also in the Omni manual.  I did this about 5 years ago and it wasn't difficult.  I can't remember if I used a general coverage receiver or an oscilloscope to do it.

The other step, which you have to be careful with, is to tweak the carrier oscillators to get the audio passband where you want.  The danger is that you don't want to go too low since you risk messing with the opposite sideband rejection.

Like I said, it was 5 years ago and I'm hazy on all this.

73,
Barry N1EU

__________________________________________________________________
Switch to Netscape Internet Service.
As low as $9.95 a month -- Sign up today at http://isp.netscape.com/register

Netscape. Just the Net You Need.

New! Netscape Toolbar for Internet Explorer
Search from anywhere on the Web and block those annoying pop-ups.
Download now at http://channels.netscape.com/ns/search/install.jsp