[TenTec] Omni D to Hercules 444 cable

[c-hawley at uiuc.edu]

I have some DB25 to DB25 cables about 20 feet long (all 25 
wires inside connected end to end) which I think are 
shielded...by noticing that the shells are connected 
together from end to end...I hesitate to cut into one in 
case you would want to make adapters at the ends instead of 
cutting the ends off. I'll send you one if you would like. 
Send me a mailing address when and if you would like one 
free.
Chuck, KE9UW

---- Original message ----
>Date: Thu, 13 Jan 2005 06:35:46 -0500
>From: "John L Merrill" <jmerrill1 at adelphia.net>  
>Subject: RE: [TenTec] Omni D to Hercules 444 cable  
>To: <tentec at contesting.com>
>
>Have you tried Ten Tec?
>
>73,
>John N1JM
>East Amherst, NY 
>
>-----Original Message-----
>From: tentec-bounces at contesting.com
>[mailto:tentec-bounces at contesting.com]On Behalf Of Douglas
>Sent: Wednesday, January 12, 2005 11:49 PM
>To: tentec at contesting.com
>Subject: [TenTec] Omni D to Hercules 444 cable
>
>
>
>Does anyone have available the band automation
>interface cable that was originally supplied with with
>Hercules 444 linear? It allows auto bandswitching with
>the early Omni transceivers.
>
>I've got the required 12 pin end connectors but coming
>across 12 conducter shielded cable isn't so easy.
>Lacking a cable, are there any suggestions for the 12
>conductor cable?
>I don't want to use rotator cable and definitely want
>it shielded. Belden offers some shielded cable but I'd
>hate to have to buy a 100 ft roll when all I need is
>18".
>
>73,
>Doug/WA1TUT