[TenTec] Which Airpax for Corsair II???

[NJ0IP]

18A, 32V is the correct one for the Corsair II.

-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of OTAKEBI at aol.com
Sent: Friday, January 14, 2005 8:34 AM
To: tentec at contesting.com
Subject: [TenTec] Which Airpax for Corsair II???

I have an Airpax 20 amp and an Airpax 18 amp fuse.
Both are fast acting.
I use the 20 amp on an OMNI V and have been using the 18 amp on my Corsair
II.
The Corsair II calls for a Ten Tec 260 power supply which is an 18 amp power

supply.
And, the Corsair II manual states that the rig requires 18.5 amps max on 
transmit.
Am I right to use the 18 amp breaker or should I use the 20 amp with my 
Astron 35M.
I have read the past post and found that most of the guys use the 20 amp on 
both the Corsair's and the OMNI's.
Will the 20 amp give enough protection or should I stick with the 18 amp?
Does anyone know if the Ten Tec 260 power supply had an 18 amp or a 20 amp?
Thanks in advance.
Dan/N4VET
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec