[TenTec] 60 Meter Mod

[jack]

to run Orion on 60 meters:

http://www.doug-smith.net/sixty.htm

press ZERO on the numeric pad
this allows transmit between 5.330 and 5.407 MHz
you must be using firmware 1.346 or later

set VFO to
5332.5 USB 50 W or less
5346.5   ditto
5366.5   ditto
5371.5   ditto
5403.5   ditto

LOCK VFO

save the above to one of the 200 available channel memories for recall

review paragraph 3.8.9 in manual

channel memories do not sotre TX BW

----- Original Message ----- 
From: "Knox, Richard" <richard.knox at gd-ais.com>
To: <tentec at contesting.com>
Sent: Monday, January 17, 2005 9:45 AM
Subject: [TenTec] 60 Meter Mod


> Good Morning Members of the TenTec Reflector!
>
>  Does anyone know if there is a mod that will allow an Omni VI+ to operate
> on the new 60 Meter Band?
>
> Thanks in advance and 73!
>
> Dick
> KD4BRL
>
> COL(R) Richard L. Knox
> Homeland Security and Assurance
> Advanced Information Systems
> General Dynamics
> Ann Arbor, Michigan 48105
>
> Tel:   734-994-1200, ext 2670
> Fax:  734-994-5338
> E-Mail:  Richard.Knox at GD-AIS.com
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>