[TenTec] Orion AUX out audio question

Tommy aldermant at alltel.net
Sun Jan 23 10:15:34 EST 2005


Hi Martin,

This is strange. Just checked mine again. Put the audio menu Left = 
Sub and can vary the left aux output by using the SubRx AF control. 
Put Left = MAIN or BOTH and vary the MAIN AF output and the left aux 
output stays constant. With Left = MAIN or BOTH, changing SubRX AF 
has no affect on pin 3 of the AUX I/O!!

Running 1.373 beta 5 so don't know if this is a new thing or not.

But regardless, since its called 'line' audio output, AUX I/O pin 4 
and pin 6 audio output level actually should be completely 
independant of what you do with the AF controls for either receiver. 
It just does not work that way however!

Tom - W4BQF

----- Original Message ----- 
From: "Martin AA6E" <msembx-aa6e at yahoo.com>
To: <tentec at contesting.com>
Sent: Sunday, January 23, 2005 9:09 AM
Subject: Re: [TenTec] Orion AUX out audio question


> Tommy,
>
> My rig does not behave that way.  Left=Sub produces constant 
> output
> unless you zero out the Sub AF volume. (v 1.372)  In that case the 
> aux.
> output is blanked out.
>
> Thinking about this a little more, I think the TT logic is just 
> wrong
> for my use.  I want the aux. output to be completely independent 
> of
> front panel level controls.  That's what "line out" normally 
> means.
> This could be fixed in firmware -- and/or made a menu option.
>
> 73, Martin AA6E
>
> --- Tommy <aldermant at alltel.net> wrote:
>
> ..however if you have
>> LEFT set for SUB, you can vary the audio level at pin 4 using the
>> SubRx AF control.
>>
>>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec 



More information about the TenTec mailing list