[TenTec] Omni VI Power Out

John L Merrill jmerrill1 at adelphia.net
Sat Jan 29 12:32:07 EST 2005


I wonder if the current limiting adjustment is off.

John N1JM

-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]On
Behalf Of Tom Lutz
Sent: Saturday, January 29, 2005 11:54 AM
To: tentec at contesting.com
Subject: [TenTec] Omni VI Power Out


My recently acquired Omni VI only gets about 80 watts out.  I tried to
adjust R46 on the 9 MHz mixer/IF board per the instruction manual but it is
all the way against the stop and can't be turned up any more.  Any ideas as
to what to do to get a full 100 watts out?  I see there is a 15k fixed
resistor in series with R46, it's R45.  Might this have changed value and
effected the total resistance?

Any help would be appreciated.

Tom, W0ZR

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.8.2 - Release Date: 1/28/2005


_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec



More information about the TenTec mailing list