[TenTec] Ten Tec Net

[w8au@sssnet.com]

At 03:45 AM 7/19/05, you wrote:
>I checked out my Paragon II manual, and sure
>enough there is a control line which causes RX input RF to bypass the
>first amplifier stage only when in 0.100 - 1.7 MHz. Looks like I could
>just disconnect one cable for a quich test of this. It is connector 16
>on the first mixer schematic.

Glad to hear that the rigs are similar in this respect.  You should notice 
12-15 dB improvement in sensitivity as I did.

Have fun....

Perry