[TenTec] PSK31

[Martin, AA6E]

For PSK31, I use the following:
  Tx BW: 3000 Hz
  LF Rolloff: 100 Hz (helps keep 60 Hz out)
  TX Eq: 0 dB

You want the widest and flattest passband for the Tx.  On Rx, I search
the waterfall with ~ 3 kHz  BW, but if there is much QRM, it's nice to
"zoom" in using PBT and BW settings (or H & L cut) to bracket the
signal in as little as a 100 Hz window.  It's good to have the Rx Eq
set to 0 db, also -- so you can work better with signals at the left
of the waterfall.

Hope this helps.

73 Martin AA6E

On 6/1/05, kjs14 at iglou.com <kjs14 at iglou.com> wrote:
> I use both the Jupiter and the Orion for PSK31.  I
> only work the 20 Meter band and use USB with a
> soundcard.  I have been setting the TX FILTER BW
> at the most narrow setting because of PSK31's
> narrow (31hz) width.  This only allows me to use
> approx the first one third of the waterfall for TX.
> 
> I have read that normal SSB settings are correct
> and then I read in another manual that TX BW
> should be set according to the digital mode in use.
> 
> So what setting is correct for the Jupiter and the
> Orion???
> 
> 73 es Tnx Ahead,
> John / KG4WNA
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 


-- 
martin.ewing at gmail.com
http://blog.aa6e.net