[TenTec] Horizontal loop for 80m

[n4lq]

The pullies are used to support the corners of the loop. The rope ties 
to the hole in the pully housing and goes over the tree limb. The loop 
wire slides through the pullys allowing the entire antenna to float 
freely as the trees sway. I had tried egg insulators and pvc plumming 
parts but they all either twisted or jammed up almost instantly. There 
is no room around he pully to slip off and jam in the housing and the 
whole thing is a great insulator. 
N4LQ

-----Original Message-----
From: "Phil Chambley, Sr." <k4dpk at comcast.net>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Date: Sat, 4 Jun 2005 15:52:33 -0400
Subject: Re: [TenTec] Horizontal loop for 80m

> I guess everyone has their own idea of what's best in a particular
> situation....I stopped using pullies years ago and started using
> "johnny
> balls" or porcelain egg insulators instead.  They're slick, won't ever
> rust
> or jam, and the rope can't jump the pulley and wedge itself between the
> wheel and the housing.
> 
> 73
> Phil K4DPK
> VFO Stabilizers and PEP adapters for wattmeters...Check out
> http://home.comcast.net/~k4dpk
> ----- Original Message ----- 
> From: <k3hx at juno.com>
> To: <tentec at contesting.com>
> Sent: Saturday, June 04, 2005 10:02 AM
> Subject: Re: [TenTec] Horizontal loop for 80m
> 
> 
> >
> > I found mine at a "Everything in the store is a dollar" store.
> >
> > You may also search out a traditional hardware store.  I got some
> >
> > Canadian-made cast aluminum pulleys with ball bearings.
> >
> > 73
> >
> > Tim  K3HX
> >
> > -- "Steve N4LQ" <n4lq at iglou.com> wrote:
> > The pully you want is the Everlast #70.
> > http://www.pennplastics.com/pulley.htm
> > Hopefully Lowes still carries them.
> >
> > Steve Ellington
> > N4LQ at iglou.com
> > ----- Original Message ----- 
> > From: <Able2fly at aol.com>
> > To: <tentec at contesting.com>
> > Sent: Saturday, June 04, 2005 9:19 AM
> > Subject: Re: [TenTec] Horizontal loop for 80m
> >
> >
> > >
> > > In a message dated 6/3/2005 9:19:30 P.M. Eastern Daylight Time,
> > > n4lq at iglou.co
> > > m writes:
> > >
> > > What you could do is take a regular 80m dipole, feed it with
> > > open  line and form it into a shape to fit the back yard. I somehow
> > > believe
> > > this  would give you less trouble than doing the multiturn thing.
> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > >
> > > I agree Steve. And thanks for the reply, it was full of good info.
> > > Especially on the plastic pulleys that I'd never thought about
> using,
> I'll
> > > pay  Lowes a
> > > visit today.
> > >
> > > Thanks
> > > Bill  K3UJ
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > TenTec mailing list
> > > TenTec at contesting.com
> > > http://lists.contesting.com/mailman/listinfo/tentec
> > >
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec at contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> >
> > ___________________________________________________________________
> > Get Juno Platinum for as low as $4.97/month!
> > Unlimited Internet Access with 250MB of Email Storage.
> > Visit http://www.juno.com/half to sign up today!
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec at contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> 
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>