[TenTec] extension of heil mic cable

[Scott Harwood]

Great solution! Thanks.
Scott K4VWK
---------- Original Message ----------------------------------
From: yash at aol.com
Reply-To: Discussion of Ten-Tec Equipment <tentec at contesting.com>
Date:  Tue, 07 Jun 2005 15:25:16 -0400

>Hi to all.
>  Let me add my 2 cents worth on this cable problem. I cut the mic cable 
>about a foot back of the mic body ,spliced in a 4 foot section of radio 
>shack
>  mic cable and did a careful solder job of the wires ,end to end ,slid 
>a tiny section of shrink tube over each connection and a larger section 
>over the cable
>  shrunk the tubeing and had a nice ,professional looking splice on the 
>cable. It was just slightly larger than the cable itself. Did the
>  same thing on the other end ... end of problem. Don't look for Heil 4 
>or 5 pin XLR looking connectors ,you will not find them easily.
> Everybody have a great day.
>  dale K8QI
>_______________________________________________
>TenTec mailing list
>TenTec at contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
>