[TenTec] Omni C

WA3FIY wa3fiy at radioadv.com
Thu Jun 16 10:39:46 EDT 2005


Forgot to add if the receive signal is very strong, I set the 
RFG for something less than S9.

What else did I forget?   :-)

-Lee-


On 16 Jun 2005 at 10:34, WA3FIY wrote:

> The "pop" can be reduced by judicious use of the RF Gain 
> control.   I usually set my RFG so the S Meter is just a little 
> bit off the peg.   I can hear any signal that is above the 
> atmospheric noise level and the inter element noise on transmit 
> is low and easy on the ears.
> 
> -Lee-
> 
> On 16 Jun 2005 at 9:40, J. Crit Harley, MD, C.Ht. wrote:
> 
> > I just acquired an Omni C.   Other than an intermittent connection with 
> > the band switch on 20 mtrs, it seems to function 100%.
> > Already noticed a bit of "pop" w/ first character on strong signals.
> > What can I expect?  Any other quirks, etc.?
> > Thanks.
> > 73/Crit/K4BXN
> > 
> > 
> > -- 
> > No virus found in this outgoing message.
> > Checked by AVG Anti-Virus.
> > Version: 7.0.323 / Virus Database: 267.6.9 - Release Date: 6/11/2005
> > 
> > _______________________________________________
> > TenTec mailing list
> > TenTec at contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> > 
> > 
> > 
> > -- 
> > No virus found in this incoming message.
> > Checked by AVG Anti-Virus.
> > Version: 7.0.323 / Virus Database: 267.7.3/15 - Release Date: 6/14/2005
> > 
> 
> 
> 
> 
> -- 
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.323 / Virus Database: 267.7.3/15 - Release Date: 6/14/2005
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 
> 
> 
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.323 / Virus Database: 267.7.3/15 - Release Date: 6/14/2005
> 




-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.7.3/15 - Release Date: 6/14/2005



More information about the TenTec mailing list