[TenTec] Corsair II

[J. W. (Dub) Thornton]

Jim:  If you are on the Oscillator-Mixer board, there is indeed a typo (in 
my manual).  Paragraph
3, page 3-7, I set the bandswitch to 14 mhz & adjusted R-29 to set display 
to 14.0000.  A drop
of De-Oxit on R-29, working R-29 back & forth a few times, prior to this 
adjustment stopped my
Corsair II's frequency hop-skip-jump'in around.  This was after a PTO 
rebuild had helped the freq
excursions very little.

Luck with it.

"73" Dub


At 02:35 PM 3/5/2005, you wrote:
>No Mike, not varible that is.  There is a typo and R29 does adjust..
>----- Original Message -----
>From: "Mike Hyder -N4NT-" <mike.hyder.n4nt at charter.net>
>To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
>Sent: Saturday, March 05, 2005 11:35 AM
>Subject: Re: [TenTec] Corsair II
>
>
> > is there a C3?
>
>_______________________________________________
>TenTec mailing list
>TenTec at contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec

-- 
J. W.  (Dub) Thornton  K5DUB
Minco, OK.