[TenTec] Fw: [ic7800] Re: keyboard problems

[K Van Horn]

My, My, My, this sure sounds familiar. I guess it implies that no radio is 
perfect, despite the manufacturers name or the  cost of the radio. I must 
point out that I have never experienced any of these problems with the 
IC7800 or the Orion!

73 es Gud DX,

Kirby, K7EC

----- Original Message ----- 
From: "ik8wjp2000" <alaint at excite.it>
To: <ic7800 at yahoogroups.com>
Sent: Sunday, March 13, 2005 7:58 AM
Subject: [ic7800] Re: keyboard problems


>
>
> Hi, only on 14Mhz my keyboard "gets crazy" when I overcome 40 watts.
> All of the sudden light go off and buttons get blocked... SWR 1.1 and
> eccellent ground system on the rig. On the other bands it doesn't
> occur even with the highest SWR !!!! I have to restart my 7800 to
> have the keyboard oparational and I cannot push out more than 40w in
> psk e rtty. ... see you de ik8wjp
>
>
>
>
> --- In ic7800 at yahoogroups.com, "jdow" <jdow at e...> wrote:
>> From: "ik8wjp2000" <alaint at e...>
>> >
>> > Has anyone encountered problems in using the keyboard for
> psk/rtty??
>> > I have just plugged my new usb keyboard but something sounds
> wrong.
>> > It gets easily blocked and I can't use it for tx or macros.. If I
>> > turn on the 7800 and I push F12 for immediately tx-ing, it is Ok,
> but
>> > if I start using the other keyboard buttons it turns out locked
> and I
>> > have to restart the rig again. Might it be a bestion of menu
>> > settings, keyboard model... Mhahh! Manual lacks of info as in
> many
>> > other things...
>> > Any advise?
>> > tnx very much for the attention
>> > de ik8wjp
>>
>> RF keyboard or does it have a cord? Either way you have RF in the
>> shack and need to deal with it. A good ground is best. But RF beads
>> may help.
>>
>> {^_^}
>
>
>
>
>
>
> Yahoo! Groups Links
>
> <*> To visit your group on the web, go to:
>    http://groups.yahoo.com/group/ic7800/
>
> <*> To unsubscribe from this group, send an email to:
>    ic7800-unsubscribe at yahoogroups.com
>
> <*> Your use of Yahoo! Groups is subject to:
>    http://docs.yahoo.com/info/terms/
>
>
>
>
>