[TenTec] TEN TEC MODEL 244 DIGITAL DISPLAY

[Larry Laflamme]

The jumpers may have been changed!  For older 540, SN#<1400 that do NOT have
the VFO mod, the jumpers from pin#2to#5 must be removed and reconnected
between pins#4and#5.  The cable came from the factory with the jumper from
pins#2and#5.
If your 540 has a serial number higher than 1400, make sure the jumpers are
back to factory setting.
Larry, N1SHM
----- Original Message -----
From: "k5qm" <k5qm at sbcglobal.net>
To: <tentec at contesting.com>
Sent: Friday, March 11, 2005 19:25
Subject: [TenTec] TEN TEC MODEL 244 DIGITAL DISPLAY


I NEED INFO ON THE PIN LAYOUT FOR THE PLUG/CABLE ON THE 244. SOMEONE HAS
MODIFIED THE CABLE.
JERRY
K5QM
PH: 1-800-7705984
K5QM at YAHOO.COM





----------------------------------------------------------------------------
----


> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>