[TenTec] Sick Omni 6+

[David S.McCallum]

Tom I know you said your 100% CW Fan but by chance did you check the SSB 
side and see if the same problem is there also. I don't have a Omni 6 + 
any more but thought I'd just ask the question, and good luck, 73 Mac

David S. McCallum/USAF RET./CMSGT/W7SAC/4
----- Original Message ----- 
From: "TOM" <n4rs at iamotelephone.com>
To: <TenTec at contesting.com>
Sent: Thursday, November 10, 2005 8:19 AM
Subject: [TenTec] Sick Omni 6+


100% CW, here are the symptoms.
Display flickers, when it does I'm in trouble. These symptoms are very 
intermittent.
*Outboard keyer does not key rig
*incoming sigs have a chirp
*sometimes no audio
*when the audio goes, the "S" meter doesn't work

Usually does the above from a cold start. Pushing and proding does 
nothing. When the display gets dimmer everything works ok. When it gets 
brighter one or all the above takes place....any help appreciated....Tom 
N4RS
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec