[TenTec] Slightly raspy receive audio in omni-V.

[Darwin, Keith]

Hi guys,
 
The Omni V I picked up is showing a bit of raspiness on RX for both SSB
and CW.  I tried two different speakers and headphones, but the problem
remained.  The TS-830s sounds smooth and pure in comparison.  TenTec
says the rig should be clean and suggested it might possibly be the chip
that does the notch function.  Apparently it has a way of inducing some
noise into the signal path.
 
I did have the PS on the left side which I've since learned may not be a
good idea.  I'll try it again with the PS on the right or as far away as
possible.  I did not check the audio out on the back of the rig but will
do that as well.
 
Any experience you guys can add?
 
And yes, I am running with AGC on and the NB off.
 
- Keith -