[TenTec] Antenna Switch

[D. Kemp]

Rick,

I recently had 2 antennas and 2 rigs wired through 2
switches.

The first switch is a B&W 6 position antenna switch
with 1 common(rig) outlet that was connected to the
common (rig) input to a TT Model 228 tuner.

The DL (dummy load) connection went to the #1 rig and
the Bypass connection went to the #2 rig.

My #1 antenna is a G5RV with an RT-11 remote tuner
attached outside and the #2 antenna is my 180 ft
horizontal loop rain gutter with an AT-100 Pro tuner
attached in the shack.

I could switch the 2 antennas between the rigs or
switch the rigs on 1 antenna. The latter is very handy
for comparing the receiver performance of 2 rigs.

Regards,

Don NN8B





Date: Fri, 9 Sep 2005 21:54:17 EDT
From: WO8L at aol.com
Subject: [TenTec] Antenna Switch
To: tentec at contesting.com
Message-ID: <15d.58ab82c8.305396c9 at aol.com>
Content-Type: text/plain; charset="US-ASCII"

Hi,
 
Anybody out there using an antenna switch to match two
antennas to two  
rigs? 
 Or using two switches to match two antennas to two
rigs?
 
73s,
 
Rick
WO8L