[TenTec] Antenna Switch

[CATFISHTWO@aol.com]

I use a switching board, I bring antenna 1 into a 1 into 2 switch this goes  
to position 1 on each of the 1 into 6 switches.  next antenna 2 comes into  a 
1 into 2  switch, and this goes to position 2 on both 1 into 6  switches... 
and so on.
 
So how it works is I put the antenna  ONE ,  1 into 2 switch to  either the 
orion or the 746  and then put the 1 into 6 switch  into  antenna 1  and now I 
am using antenna one on rig one. 
 
If you want to ue 3 rig you use 1 into 3 switches  for each antenna an  then 
give each rig a 1 into 6 switch.
 
By the way I actually use the  double  1 into 6 switch ( mfj 1708  ) and it 
is  2 separate 1X6 switches on the same box, they are not  connected 
internally. If you want a 6 in /6 out you would connect the 2 commons  together with a 
jumper
 
Tom  N6AJR