[TenTec] Problem: Please confirm Orion II Radios

[Douglas Shock]

Phil,
Mine did the same. Do a abttery reset, then a master reset...the problem
never occured again

On 4/2/06, AI4DQ at aol.com <AI4DQ at aol.com> wrote:
>
> Version 2.032 software
> When operating my new Orion II this am Had terrible Noise with NB set to
> 2  ,
> NR 3, Notch on and the SP set 3 and sweep on  I then went notch
> C  position
> rotating the Down from 1000HZ  when I get past 900HZ  I lose  audio and is
> replaced with crackling sound The only way to restore the audio is  by
> turning the
> radio off and on a reset is not required. I would like others to  confirm,
> And I have one other owner confirm(WB4QDA) this Bug. and would
> like  everyone to
> confirm this. I tried others setting but the NB has to be on and the  NR
> has
> to be on as well as Notch.
>
> Phil AI4DQ
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>