[TenTec] Signal generator recommendations?

[Mike Gusky]

I recently purchased an Omni C that needed some minor alignment work.
Thought ao

-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of Al Gulseth
Sent: Saturday, April 08, 2006 7:47 PM
To: Discussion of Ten-Tec Equipment
Subject: [TenTec] Signal generator recommendations?

Needing more advice here:

I'm thinking strongly that I need to pick up a signal generator since I seem

to be quite frequently dealing with minor issues on my "collection" of old 
PTO based rigs. What would be a step up from the old Eico/Heath etc. type 
offerings that would [hopefully] be inexpensive and have a relatively small 
footprint? I'd like to have a calibrated attenuator if possible but beyond 
that, as long as it covers the HF range and is reasonably stable I'm not 
picky (analog is fine, doesn't have to be synthesized). Also, I'd prefer 
solid state if possible. Maybe something of the older HP etc. offerings like

the HP 8601 without the sweep function?
-- 
TNX/73, Al

NOTICE to spammers and email address harvesters: you are hereby prohibited 
from harvesting, reselling or redistributing this email address in any form,

or sending unsolicited commercial email ("spam") to it. Should you choose to

violate this prohibition, you agree that you will compensate the holder of 
this address according to the following schedule: for harvesting this
address 
(by manual or automatic means), $100,000 per incident; for reselling or 
redistributing this address, $10,000 per copy; and $1,000 per unsolicited 
message ("spam") sent to this address. You also agree that you will 
relinquish any or all business and/or personal assets necessary to satisfy 
this obligation and any associated costs of collection and/or legal fees. 
Failure to read this notice does not release you from liability in this 
matter.
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec