[TenTec] (no subject)

[Paul Sojka]

I've lost sensitivity on the 6.5 - 10.5 section of the Paragon 585. It's happened
a few times before and was cured by replacing Diode D12, a 1N4148, on the RX high pass filter
board. It didn't work this time. I swapped diode D5 with one on the same board and
it still did not work. I jumpered D5 with a wire and it works. The diode is a type
BA482 which I cannot find. Any ideas why it works jumpered? Anyone have a source
of this type diode aside from Ten Tec? I'd like to buy a few. The 1N4148's are in
Radio Shack so no problem there.  Thanks, 
Paul
KS2S


________________________________________
PeoplePC Online
A better way to Internet
http://www.peoplepc.com