[TenTec] PSK31 with Orion I V2

[jack]

Bernard, i use LOGic8 and MixW. the connection to the Orion is simple plug 
the serial cable into your computer or into a USB to serial adapter. you may 
have to set your software to the COM port.

if you wish to use your software to send CW, you will need another serial 
port or USB connection to a keying circuit of some simple sort.

the cable supplied with your Orion for the I/O Aux to computer sound card 
does the digital mode your software specifies.

MixW's help file shows a two resistor, one diode, one transistor circuit 
that keys CW.

otherwise there is only the Orion to set. the manual suggests starting 
points for digital operation.

i have two Orions hooked to my computer. LOGic8 reads them both at the same 
time. with the mouse i can set the active radio. i have separate CW keying 
switches which can change in MixW by changing the COM port to be keyed. 
digital modes need no other connectors.

the Orion was engineered for digital modes and needs no adapters of any kind 
except to go from the ends of the I/O cable which have RCA plugs to 1/8" 
plugs for the sound card.

73 jack ak7o

ich wuensche ich koennte alles auf Deutsch erklaren, aber mein Deutsch 
reicht nicht!


----- Original Message ----- 
From: "Bernhard Hoidn" <bernhard.hoidn at onlinehome.de>
To: "TenTecForum" <tentec at contesting.com>
Sent: Friday, August 18, 2006 4:35 AM
Subject: [TenTec] PSK31 with Orion I V2


> Hallo
>
> can I use my Orion I V2 in PSK31 without an interface?
> And if its possible, how is the connection between soundcard and TRX?
>
> I use the Hamradio del Luxe/ PSK31 DeLuxe software.
>
>
> Thanks for help
>
>
> Bernhard
> DL2RBB
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>