[TenTec] Omni V.9 - software

[HUGHESRO]

Thanks John. The omni 6 does work on Win-eqf. I hve N1MM software downloaded and will try. Ham Radio Delux won't work unless I say it's a IC 703 or 735. I miss using N4PY. I sure want the Omni 7 but pennies may be short. Hi Hi I may sell 1000mp mark 5 but never sell Omni 6. It's sweet on CW. The only thing I don't like about the Omni 6 is the speaker in the Power supply. I use the Yaesu Sp 5 which sounds much better and has the filters in it. I want to remote the base and be able to use laptop from office and work dx. I'm not a techinal computer person. So my learning is slow. I'm afraid to retire as I will have no time to play radios. HiHi. Agn tnxs for ur help John. 73 Roger W4IV
---------- Original Message ----------------------------------
From: J A Crux <jac.trademarks at tiscali.co.uk>
Reply-To: jac at patents.freeserve.co.uk,Discussion of Ten-Tec Equipment <tentec at contesting.com>
Date:  Wed, 30 Aug 2006 00:03:05 +0100

>Logger32 works with the modified RS-232 interface. The Omni V.9 is even in the 
>list of radios you can opt to use.   I tested it briefly with an earlier 
>version before that and it had no problem putting the frequency into the log.
>
>I am lazy and I still use my old beta version of Hyperlog Pro, incomplete and 
>no longer developed/supported, and that works fine within the limitations of 
>the hardware/software.
>
>I guess that any programme capable of talking to an ICOM CIV interface.should 
>work, to some extent at least. But unless you have a programme written 
>specifically for the features of a particular radio, your mileage will always 
>vary. But in this case, the V.9 chip and hardware mod makes the difference 
>between being able to use the Omni V RS-232 port and not being able to do 
>much if anything with it. I have never seen a programme that could control 
>the original TT interface. 
>73 John G3JAG
>_______________________________________________
>TenTec mailing list
>TenTec at contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
>