[TenTec] Radio Control/Contesting??

[AD5VJ Bob]

> 
> Option 2 was same except it had the keypad changed to reflect 
> differences INSTEAD of stickers on keys.
> 
> Option 3 was same PLUS added a new filter board and an 
> additional filter position.
> 

OK so to move from an opt2 to an opt3 I plug in a new filter board and install a new switch on the front panel? 

> -----Original Message-----
> From: tentec-bounces at contesting.com 
> [mailto:tentec-bounces at contesting.com] On Behalf Of 
> k8vf_mark at centurytel.net
> Sent: Saturday, December 23, 2006 9:05 PM
> To: tentec at contesting.com
> Subject: Re: [TenTec] Radio Control/Contesting??
> 
> http://www.qsl.net/tentec/
> 
> 
> This may help some. Check above link.
> 
> Omni a/d were same except one had digital readout.
> 
> Omni a/d series B changed filter schemes.
> 
> Omni D series C added some bands, changed filter schemes. HAD 
> SAME MODEL NUMBER AS OMNI D, essentially same rig.
> 
> All had PTO's.
> 
> Dont forget Omni V, Omni VI, Omni VI with possible options 
> 1-2-or 3, Omni VI PLUS which was essentially an OMNI VI 
> option 3-only it was sent from the factory NEW that way.
> 
> Omni VI option 1 moved some functions to front panel which 
> had been in menus. Allowed LP filter to operate in cw and ssb modes.
> 
> Option 2 was same except it had the keypad changed to reflect 
> differences INSTEAD of stickers on keys.
> 
> Option 3 was same PLUS added a new filter board and an 
> additional filter position.
> 
> I am sure I missed something so before I get corrected, you 
> are right . 
> Sorry. 
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>