[TenTec] Orion meter pegging on CW TX

[k3hx at juno.com]

OM,

My concern is with the initial dit or dah, the meter needle slams

against the peg and then stays there as you noted.  

73,


Tim

-- "Chortek, Robert L" <robert.chortek at berliner.com> wrote:
The needle on my Orion II goes to the peak value, whatever level that
may be depending on the power level, and holds at that peak while I
continue to xmit, without moving between dits and dahs. It is very nice.


Does yours work differently?

73,

Bob/AA6VB

Tim Wrote:  When running at indicated PWR levels above "70" the meter
needle pegs to the right when the transmitter is keyed on CW. I'd be
grateful to know of a damping technique to remedy this.
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec



________________________________________________________________________
Try Juno Platinum for Free! Then, only $9.95/month!
Unlimited Internet Access with 1GB of Email Storage.
Visit http://www.juno.com/value to sign up today!