[TenTec] FS: Argosy 525 with calibrator and 8 pole filter

WA4VEC@aol.com WA4VEC at aol.com
Sat Feb 4 14:35:21 EST 2006


Shack cleaning prior to the Orlando Hamvention has uncovered an Argosy 525  
that I rarely use anymore.  I thought I would offer it on the   reflector 
before hauling it off next Friday. 
 
It has the crystal calibrator and the 8 pole SSB filter in place of  the 
stock 4 pole one.  It works great and will put out a bit more than 50  watts.  The 
only problem I have noticed is that the S meter will sometimes  stick to the 
left and can be unstuck by a gentle tap.   I did not  notice this problem the 
last time I used it, so perhaps it will go away with  some additional air 
time. 
 
The top panel has paint missing and someone added 4 sheet metal screws (I  
think to use it with a mobile bracket).  The front panel is not perfect but  all 
the knobs are intact and all the lettering is readable with the 3.5  mark 
being a bit faded.   You can also see some cracks around the  front panel screws. 
  I will take $150.00 plus shipping from  32225.  I can also deliver it to 
Orlando next weekend.
 
Walt
WA4VEC  
 
 


More information about the TenTec mailing list