[TenTec] Orion II and rigblaster pro

[Barry LaZar]

Doug,
	I found that I can run the digital modes without having to use a
RigBlaster. I just feed audio into and out of my computer via the AUX
connector on the back of the radio. It seems to work fine with no problems.
PTT is also connected to the AUX connector from the computers serial port
RTS. Tentec supplied a wired connector for this purpose with female RCA
connectors for each of the connector pins. It was a mindless setup. Seems
Tentec was proactive on this issue and planned for this.

73,
Barry
K3NDM

-----Original Message-----
From: tentec-bounces at contesting.com
[mailto:tentec-bounces at contesting.com]On Behalf Of Doug Shock
Sent: Wednesday, February 08, 2006 5:10 PM
To: tentec at contesting.com
Subject: [TenTec] Orion II and rigblaster pro


The Orion II will be delivered tomorrow. I bought a rigblaster pro and
will mate the two. Any suggestions or tips?



Also, I read somewhere that the Heil Yaesu pigtail will work on the
Orion II and my pro headset. Did I read this correctly?





Thanks

Doug / K0ZU

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec