[TenTec] Another RTTY story

[Thomas Jednacz]

On the O2 go to "menu", "other" and at the bottom of the list you will find
a line item to select the source of the "line out" and he last line is "line
out level" where you can select "low", "medium", "high".

Tom, W7QF

> -----Original Message-----
> From: tentec-bounces at contesting.com 
> [mailto:tentec-bounces at contesting.com] On Behalf Of RaySoifer at cs.com
> Sent: Tuesday, February 14, 2006 21:20
> To: tentec at contesting.com
> Subject: Re: [TenTec] Another RTTY story
> 
> In a message dated 2/15/06 1:55:44 AM GMT Standard Time, 
> wb5hak at duracom.net
> writes: 
> > how do you set the level of audio out on the AUX port??  I 
> cannot for 
> > the life of me find it, unless the main AF control controls it, but 
> > that wouldn't be normal for a "line out" output.
> > 
> 
> I can't find a control for that either.  It looks to be a 
> fixed-level output, since the AF output control does not 
> affect it.  So, I use the computer's mic gain setting as the 
> RX audio level control.  The O2 provides enough output for my 
> computer to work in that mode, although there isn't enough 
> audio output to use the computer's line input jack.
> 
> Hope this helps.
> 
> 73,
> 
> Ray W2RS
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>