[TenTec] O2_CW_SEND1_PROBLEM

[Lin Davis]

I also have the white dot next to the STEP value on my Orion II (2.030) using 
COLOR 3.

I also have a rare problem with audio when selecting BinRX=Main (AUDIO Menu) and 
is related to having NR and/or Notch on, as far as I can tell. With headphones, 
audio turns into very loud "digital" noise which varies in intensity with the 
sweep! When I pull the headphones plug out, the noise is present through the 
speaker.

73,
Lin
WB1AIW

John Nason / NA9U wrote:

> I have Orion II with 2.030.  No white dot but yes I
> drop characters on SEND1, 2 and 3.  It is intermittent
> and I never know when its going to happen. Seems like
> the send buttons don't have a high enough priority to
> the processor.  
> 
> 73,
> John NA9U
> 
> --- George K <w2yj at highstream.net> wrote:
> 
> 
>>I do a lot of contesting and DX'ing and what I have
>>experienced with my new 
>>O2 and not with my O1 is that I have my call stored
>>in "SEND1". Every once 
>>in a while when I press send1 to send my call it
>>seems to miss the first few 
>>characters of my call and I must scramble to send it
>>by hand.
>>I upgraded the firmware to 2.030 and it still
>>happens.
>>Has anyone else experienced this?
>>Also, I noticed a small white dot just to the right
>>of the STEP number 
>>toward the right hand side of the digit. It may be a
>>small thing but does 
>>anyone else notice it? It takes a while when the
>>sweep is on to appear. Turn 
>>the rig off and back on and it's gone only to appear
>>a while later. Look 
>>closely at  the far right of the digit. It doesn't
>>seem to pop up when the 
>>sweep is off.
>>I noticed the same thing on the display O2 at
>>Orlando and mentioned it.
>>George 
>>
>>
>>_______________________________________________
>>TenTec mailing list
>>TenTec at contesting.com
>>http://lists.contesting.com/mailman/listinfo/tentec
>>
> 
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 
>