[TenTec] Voltages on 262G power supply

[w8au@sssnet.com]

At 03:03 PM 2/27/06, James C. Owen, III wrote:
>    I think you should crank the voltage up to the rated 13.9V.
>I'm not familar with the 262G supply but I assume it's like most
>others in that is has a voltage adjustment pot inside.

There is no voltage adjust inside.  Only a crowbar adjustment for
overcurrent.

However, you can jack up the voltage to 13.8 or so by adding a
series diode or two to the reference diode already there.
(.6V for each added silicon diode)

Works fine.

Perry w8au